Answer: A

NEW QUESTION: 2
Your customer's WAN edge connects to two service providers SP-A and SP-B. The customer is advertising a single /22 subnet to both service providers through EBGP peering sessions. The customer wants to influence inbound traffic to the advertised /22 destination prefix so that it passes through SP-A when both paths are operational.
Which action meets the customer's requirement?
A. Advertise the prefix to SP-B with an origin of unknown.
B. Advertise the prefix to SP-A with an origin of unknown.
C. Advertise the prefix to SP-A with a lower MED value than that sent to SP-B.
D. Advertise the prefix to SP-B with a lower MED value than that sent to SP-A.
Answer: C
Explanation:
https://www.juniper.net/documentation/en_US/junos/topics/topic-map/med-attribute.html

NEW QUESTION: 3
Refer to the exhibit. Which two statements are true based the output of the show frame-relay lmi command issued on the Branch router? (Choose two.)

A. The router is providing a clock signal on Serial0/0 on the circuit to the Frame Relay switch.
B. The Frame Relay switch is not responding to LMI requests from the router.
C. LMI messages are being sent on DLCI 1023.
D. LMI messages are being sent on DLCI 0.
E. The LMI exchange between the router and Frame Relay switch is functioning properly.
F. Interface Serial0/0 is not configured to encapsulate Frame Relay.
Answer: B,D

NEW QUESTION: 4
What should the LT'M Specialist add to the virtual server?

A. two
Stream profiles and an iRule with the command of STREAM expression (@http:// @https://
@@internalapp@publicapp@)
B. one
Stream profile with the expression of @http:// @https:// @
C. Two Stream profiles, one profile for each rewrite requirement
D. one
Stream profile and an iRule with the command of STREAM expression (@http:// @https://
@@internalapp@publicapp@)
Answer: D

, 65503$
Answer: A

NEW QUESTION: 2
Your customer's WAN edge connects to two service providers SP-A and SP-B. The customer is advertising a single /22 subnet to both service providers through EBGP peering sessions. The customer wants to influence inbound traffic to the advertised /22 destination prefix so that it passes through SP-A when both paths are operational.
Which action meets the customer's requirement?
A. Advertise the prefix to SP-B with an origin of unknown.
B. Advertise the prefix to SP-A with an origin of unknown.
C. Advertise the prefix to SP-A with a lower MED value than that sent to SP-B.
D. Advertise the prefix to SP-B with a lower MED value than that sent to SP-A.
Answer: C
Explanation:
https://www.juniper.net/documentation/en_US/junos/topics/topic-map/med-attribute.html

NEW QUESTION: 3
Refer to the exhibit. Which two statements are true based the output of the show frame-relay lmi command issued on the Branch router? (Choose two.)

A. The router is providing a clock signal on Serial0/0 on the circuit to the Frame Relay switch.
B. The Frame Relay switch is not responding to LMI requests from the router.
C. LMI messages are being sent on DLCI 1023.
D. LMI messages are being sent on DLCI 0.
E. The LMI exchange between the router and Frame Relay switch is functioning properly.
F. Interface Serial0/0 is not configured to encapsulate Frame Relay.
Answer: B,D

NEW QUESTION: 4
What should the LT'M Specialist add to the virtual server?

A. two
Stream profiles and an iRule with the command of STREAM expression (@http:// @https://
@@internalapp@publicapp@)
B. one
Stream profile with the expression of @http:// @https:// @
C. Two Stream profiles, one profile for each rewrite requirement
D. one
Stream profile and an iRule with the command of STREAM expression (@http:// @https://
@@internalapp@publicapp@)
Answer: D

dumps, Sugakumaster 65503$
Answer: A

NEW QUESTION: 2
Your customer's WAN edge connects to two service providers SP-A and SP-B. The customer is advertising a single /22 subnet to both service providers through EBGP peering sessions. The customer wants to influence inbound traffic to the advertised /22 destination prefix so that it passes through SP-A when both paths are operational.
Which action meets the customer's requirement?
A. Advertise the prefix to SP-B with an origin of unknown.
B. Advertise the prefix to SP-A with an origin of unknown.
C. Advertise the prefix to SP-A with a lower MED value than that sent to SP-B.
D. Advertise the prefix to SP-B with a lower MED value than that sent to SP-A.
Answer: C
Explanation:
https://www.juniper.net/documentation/en_US/junos/topics/topic-map/med-attribute.html

NEW QUESTION: 3
Refer to the exhibit. Which two statements are true based the output of the show frame-relay lmi command issued on the Branch router? (Choose two.)

A. The router is providing a clock signal on Serial0/0 on the circuit to the Frame Relay switch.
B. The Frame Relay switch is not responding to LMI requests from the router.
C. LMI messages are being sent on DLCI 1023.
D. LMI messages are being sent on DLCI 0.
E. The LMI exchange between the router and Frame Relay switch is functioning properly.
F. Interface Serial0/0 is not configured to encapsulate Frame Relay.
Answer: B,D

NEW QUESTION: 4
What should the LT'M Specialist add to the virtual server?

A. two
Stream profiles and an iRule with the command of STREAM expression (@http:// @https://
@@internalapp@publicapp@)
B. one
Stream profile with the expression of @http:// @https:// @
C. Two Stream profiles, one profile for each rewrite requirement
D. one
Stream profile and an iRule with the command of STREAM expression (@http:// @https://
@@internalapp@publicapp@)
Answer: D

, 65503$
Answer: A

NEW QUESTION: 2
Your customer's WAN edge connects to two service providers SP-A and SP-B. The customer is advertising a single /22 subnet to both service providers through EBGP peering sessions. The customer wants to influence inbound traffic to the advertised /22 destination prefix so that it passes through SP-A when both paths are operational.
Which action meets the customer's requirement?
A. Advertise the prefix to SP-B with an origin of unknown.
B. Advertise the prefix to SP-A with an origin of unknown.
C. Advertise the prefix to SP-A with a lower MED value than that sent to SP-B.
D. Advertise the prefix to SP-B with a lower MED value than that sent to SP-A.
Answer: C
Explanation:
https://www.juniper.net/documentation/en_US/junos/topics/topic-map/med-attribute.html

NEW QUESTION: 3
Refer to the exhibit. Which two statements are true based the output of the show frame-relay lmi command issued on the Branch router? (Choose two.)

A. The router is providing a clock signal on Serial0/0 on the circuit to the Frame Relay switch.
B. The Frame Relay switch is not responding to LMI requests from the router.
C. LMI messages are being sent on DLCI 1023.
D. LMI messages are being sent on DLCI 0.
E. The LMI exchange between the router and Frame Relay switch is functioning properly.
F. Interface Serial0/0 is not configured to encapsulate Frame Relay.
Answer: B,D

NEW QUESTION: 4
What should the LT'M Specialist add to the virtual server?

A. two
Stream profiles and an iRule with the command of STREAM expression (@http:// @https://
@@internalapp@publicapp@)
B. one
Stream profile with the expression of @http:// @https:// @
C. Two Stream profiles, one profile for each rewrite requirement
D. one
Stream profile and an iRule with the command of STREAM expression (@http:// @https://
@@internalapp@publicapp@)
Answer: D

exam, Exam 4: Invigilated Theory Exam certification"> Answer: A

NEW QUESTION: 2
Your customer's WAN edge connects to two service providers SP-A and SP-B. The customer is advertising a single /22 subnet to both service providers through EBGP peering sessions. The customer wants to influence inbound traffic to the advertised /22 destination prefix so that it passes through SP-A when both paths are operational.
Which action meets the customer's requirement?
A. Advertise the prefix to SP-B with an origin of unknown.
B. Advertise the prefix to SP-A with an origin of unknown.
C. Advertise the prefix to SP-A with a lower MED value than that sent to SP-B.
D. Advertise the prefix to SP-B with a lower MED value than that sent to SP-A.
Answer: C
Explanation:
https://www.juniper.net/documentation/en_US/junos/topics/topic-map/med-attribute.html

NEW QUESTION: 3
Refer to the exhibit. Which two statements are true based the output of the show frame-relay lmi command issued on the Branch router? (Choose two.)

A. The router is providing a clock signal on Serial0/0 on the circuit to the Frame Relay switch.
B. The Frame Relay switch is not responding to LMI requests from the router.
C. LMI messages are being sent on DLCI 1023.
D. LMI messages are being sent on DLCI 0.
E. The LMI exchange between the router and Frame Relay switch is functioning properly.
F. Interface Serial0/0 is not configured to encapsulate Frame Relay.
Answer: B,D

NEW QUESTION: 4
What should the LT'M Specialist add to the virtual server?

A. two
Stream profiles and an iRule with the command of STREAM expression (@http:// @https://
@@internalapp@publicapp@)
B. one
Stream profile with the expression of @http:// @https:// @
C. Two Stream profiles, one profile for each rewrite requirement
D. one
Stream profile and an iRule with the command of STREAM expression (@http:// @https://
@@internalapp@publicapp@)
Answer: D

exam materials provided by Sugakumaster is reached 99%. It can help you pass the exam quickly and smoothly. 100% quality guarantee, you can get a full refund if you lost the exam! You can trust it!">

Home > PREX-1060A > Exam 4: Invigilated Theory Exam > 65503$
Answer: A

NEW QUESTION: 2
Your customer's WAN edge connects to two service providers SP-A and SP-B. The customer is advertising a single /22 subnet to both service providers through EBGP peering sessions. The customer wants to influence inbound traffic to the advertised /22 destination prefix so that it passes through SP-A when both paths are operational.
Which action meets the customer's requirement?
A. Advertise the prefix to SP-B with an origin of unknown.
B. Advertise the prefix to SP-A with an origin of unknown.
C. Advertise the prefix to SP-A with a lower MED value than that sent to SP-B.
D. Advertise the prefix to SP-B with a lower MED value than that sent to SP-A.
Answer: C
Explanation:
https://www.juniper.net/documentation/en_US/junos/topics/topic-map/med-attribute.html

NEW QUESTION: 3
Refer to the exhibit. Which two statements are true based the output of the show frame-relay lmi command issued on the Branch router? (Choose two.)

A. The router is providing a clock signal on Serial0/0 on the circuit to the Frame Relay switch.
B. The Frame Relay switch is not responding to LMI requests from the router.
C. LMI messages are being sent on DLCI 1023.
D. LMI messages are being sent on DLCI 0.
E. The LMI exchange between the router and Frame Relay switch is functioning properly.
F. Interface Serial0/0 is not configured to encapsulate Frame Relay.
Answer: B,D

NEW QUESTION: 4
What should the LT'M Specialist add to the virtual server?

A. two
Stream profiles and an iRule with the command of STREAM expression (@http:// @https://
@@internalapp@publicapp@)
B. one
Stream profile with the expression of @http:// @https:// @
C. Two Stream profiles, one profile for each rewrite requirement
D. one
Stream profile and an iRule with the command of STREAM expression (@http:// @https://
@@internalapp@publicapp@)
Answer: D

Exam PREX-1060A Discount, PREX-1060A Real Torrent | PREX-1060A Reliable Study Plan - Sugakumaster

65503$<br/><strong>Answer: A</strong><br/><br/></p><p><strong>NEW QUESTION: 2</strong><br/>Your customer's WAN edge connects to two service providers SP-A and SP-B. The customer is advertising a single /22 subnet to both service providers through EBGP peering sessions. The customer wants to influence inbound traffic to the advertised /22 destination prefix so that it passes through SP-A when both paths are operational.<br/>Which action meets the customer's requirement?<br/><strong>A.</strong> Advertise the prefix to SP-B with an origin of unknown.<br/><strong>B.</strong> Advertise the prefix to SP-A with an origin of unknown.<br/><strong>C.</strong> Advertise the prefix to SP-A with a lower MED value than that sent to SP-B.<br/><strong>D.</strong> Advertise the prefix to SP-B with a lower MED value than that sent to SP-A.<br/><strong>Answer: C</strong><br/>Explanation:<br/>https://www.juniper.net/documentation/en_US/junos/topics/topic-map/med-attribute.html<br/><br/></p><p><strong>NEW QUESTION: 3</strong><br/>Refer to the exhibit. Which two statements are true based the output of the show frame-relay lmi command issued on the Branch router? (Choose two.)<br/><img src=

A. The router is providing a clock signal on Serial0/0 on the circuit to the Frame Relay switch.
B. The Frame Relay switch is not responding to LMI requests from the router.
C. LMI messages are being sent on DLCI 1023.
D. LMI messages are being sent on DLCI 0.
E. The LMI exchange between the router and Frame Relay switch is functioning properly.
F. Interface Serial0/0 is not configured to encapsulate Frame Relay.
Answer: B,D

NEW QUESTION: 4
What should the LT'M Specialist add to the virtual server?

A. two
Stream profiles and an iRule with the command of STREAM expression (@http:// @https://
@@internalapp@publicapp@)
B. one
Stream profile with the expression of @http:// @https:// @
C. Two Stream profiles, one profile for each rewrite requirement
D. one
Stream profile and an iRule with the command of STREAM expression (@http:// @https://
@@internalapp@publicapp@)
Answer: D

">

Exam Code: 65503$
Answer: A

NEW QUESTION: 2
Your customer's WAN edge connects to two service providers SP-A and SP-B. The customer is advertising a single /22 subnet to both service providers through EBGP peering sessions. The customer wants to influence inbound traffic to the advertised /22 destination prefix so that it passes through SP-A when both paths are operational.
Which action meets the customer's requirement?
A. Advertise the prefix to SP-B with an origin of unknown.
B. Advertise the prefix to SP-A with an origin of unknown.
C. Advertise the prefix to SP-A with a lower MED value than that sent to SP-B.
D. Advertise the prefix to SP-B with a lower MED value than that sent to SP-A.
Answer: C
Explanation:
https://www.juniper.net/documentation/en_US/junos/topics/topic-map/med-attribute.html

NEW QUESTION: 3
Refer to the exhibit. Which two statements are true based the output of the show frame-relay lmi command issued on the Branch router? (Choose two.)

A. The router is providing a clock signal on Serial0/0 on the circuit to the Frame Relay switch.
B. The Frame Relay switch is not responding to LMI requests from the router.
C. LMI messages are being sent on DLCI 1023.
D. LMI messages are being sent on DLCI 0.
E. The LMI exchange between the router and Frame Relay switch is functioning properly.
F. Interface Serial0/0 is not configured to encapsulate Frame Relay.
Answer: B,D

NEW QUESTION: 4
What should the LT'M Specialist add to the virtual server?

A. two
Stream profiles and an iRule with the command of STREAM expression (@http:// @https://
@@internalapp@publicapp@)
B. one
Stream profile with the expression of @http:// @https:// @
C. Two Stream profiles, one profile for each rewrite requirement
D. one
Stream profile and an iRule with the command of STREAM expression (@http:// @https://
@@internalapp@publicapp@)
Answer: D

Exam Name:

Certification

Version: V16.75

Q & A: 400 Questions and Answers

65503$
Answer: A

NEW QUESTION: 2
Your customer's WAN edge connects to two service providers SP-A and SP-B. The customer is advertising a single /22 subnet to both service providers through EBGP peering sessions. The customer wants to influence inbound traffic to the advertised /22 destination prefix so that it passes through SP-A when both paths are operational.
Which action meets the customer's requirement?
A. Advertise the prefix to SP-B with an origin of unknown.
B. Advertise the prefix to SP-A with an origin of unknown.
C. Advertise the prefix to SP-A with a lower MED value than that sent to SP-B.
D. Advertise the prefix to SP-B with a lower MED value than that sent to SP-A.
Answer: C
Explanation:
https://www.juniper.net/documentation/en_US/junos/topics/topic-map/med-attribute.html

NEW QUESTION: 3
Refer to the exhibit. Which two statements are true based the output of the show frame-relay lmi command issued on the Branch router? (Choose two.)

A. The router is providing a clock signal on Serial0/0 on the circuit to the Frame Relay switch.
B. The Frame Relay switch is not responding to LMI requests from the router.
C. LMI messages are being sent on DLCI 1023.
D. LMI messages are being sent on DLCI 0.
E. The LMI exchange between the router and Frame Relay switch is functioning properly.
F. Interface Serial0/0 is not configured to encapsulate Frame Relay.
Answer: B,D

NEW QUESTION: 4
What should the LT'M Specialist add to the virtual server?

A. two
Stream profiles and an iRule with the command of STREAM expression (@http:// @https://
@@internalapp@publicapp@)
B. one
Stream profile with the expression of @http:// @https:// @
C. Two Stream profiles, one profile for each rewrite requirement
D. one
Stream profile and an iRule with the command of STREAM expression (@http:// @https://
@@internalapp@publicapp@)
Answer: D

Free Demo download

PDF Version Demo PC Test Engine Online Test Engine

About PREX-1060A 65503$
Answer: A

NEW QUESTION: 2
Your customer's WAN edge connects to two service providers SP-A and SP-B. The customer is advertising a single /22 subnet to both service providers through EBGP peering sessions. The customer wants to influence inbound traffic to the advertised /22 destination prefix so that it passes through SP-A when both paths are operational.
Which action meets the customer's requirement?
A. Advertise the prefix to SP-B with an origin of unknown.
B. Advertise the prefix to SP-A with an origin of unknown.
C. Advertise the prefix to SP-A with a lower MED value than that sent to SP-B.
D. Advertise the prefix to SP-B with a lower MED value than that sent to SP-A.
Answer: C
Explanation:
https://www.juniper.net/documentation/en_US/junos/topics/topic-map/med-attribute.html

NEW QUESTION: 3
Refer to the exhibit. Which two statements are true based the output of the show frame-relay lmi command issued on the Branch router? (Choose two.)

A. The router is providing a clock signal on Serial0/0 on the circuit to the Frame Relay switch.
B. The Frame Relay switch is not responding to LMI requests from the router.
C. LMI messages are being sent on DLCI 1023.
D. LMI messages are being sent on DLCI 0.
E. The LMI exchange between the router and Frame Relay switch is functioning properly.
F. Interface Serial0/0 is not configured to encapsulate Frame Relay.
Answer: B,D

NEW QUESTION: 4
What should the LT'M Specialist add to the virtual server?

A. two
Stream profiles and an iRule with the command of STREAM expression (@http:// @https://
@@internalapp@publicapp@)
B. one
Stream profile with the expression of @http:// @https:// @
C. Two Stream profiles, one profile for each rewrite requirement
D. one
Stream profile and an iRule with the command of STREAM expression (@http:// @https://
@@internalapp@publicapp@)
Answer: D

Exam

We guarantee that our reliable PREX-1060A study materials will balance your business, work and life schedule as if you use our test dumps, you will spend less time on the PREX-1060A study guide materials, before the real test you will only memorize the questions and answers of PREX-1060A certification training questions, Humber College PREX-1060A Exam Discount We can be along with you in the development of IT industry.

Create a blog if you don't already have one, It quickly becomes Exam PREX-1060A Discount obvious that traffic in this scenario could potentially run in a continuous loop around the same city block.

Facial recognition is difficult and results in many false positive matches, https://examtorrent.actualcollection.com/PREX-1060A-exam-questions.html But the bottom line is self employment allows experimentation and learning opportunities that lead to higher lifetime earnings.

I'll hold you to that, Packed with vibrant, full-color illustrations, it abstracts Exam PREX-1060A Discount away much of the complexity of building deep learning models, making the field more fun to learn, and accessible to a far wider audience.

Bad Things Can Happen, Urinary Tract Infections, Exam PREX-1060A Discount The list of important and necessary goals goes on and on, Perhaps the best side effect is that because Flash will know what data type your variable GRCA Real Torrent contains, it will trigger code hints when you later type the variable name followed by a period.

PREX-1060A Training Pdf Material & PREX-1060A Latest Study Material & PREX-1060A Test Practice Vce

Accessing a Custom Tag, This distinction is necessary for the next more propositional proposition, You only take 20 to 30 hours to practice our PREX-1060A guide materials and then you can take the exam.

It will also explain how to save and store, or automatically delete Relevant CCSK Exam Dumps messages after a period of time, We recently started using Google sites as an intranet, Which finding should be reported to the doctor?

We guarantee that our reliable PREX-1060A study materials will balance your business, work and life schedule as if you use our test dumps, you will spend less time on the PREX-1060A study guide materials, before the real test you will only memorize the questions and answers of PREX-1060A certification training questions.

We can be along with you in the development of IT industry, PREX-1060A actual test materials offer the valid exam content with core knowledge which can give much convenience for preparing and meet the Latest Apple-Device-Support Exam Answers needs of different people and achieve dreams for many people participating qualification exams.

Humber College PREX-1060A Exam Discount Are Leading Materials & PREX-1060A Real Torrent

provide you with 24 free online customer service, They give you different experience on trying out according to your interests and hobbies, We believe that our PREX-1060A exam questions can be excellent beyond your expectation.

If you decide to buy our study materials, you Exam PREX-1060A Discount will never miss any important information, These are just a few of the fields you can be a part of: Help Desk Technician PC Technician HPE2-B06 Reliable Study Plan Field Service Technician Manufacturing Start your own computer repair business.

All in all, we have invested many efforts on compiling of the PREX-1060A practice guide, Just buy our PREX-1060A exam questions, Sugakumaster are specialized in providing our customers with the most reliable and accurate PREX-1060A exam guide and help them pass their PREX-1060A exams by achieve their satisfied scores.

Efficiency is base of the economics, Isn't there an easy Exam PREX-1060A Discount way to help all candidates pass their exam successfully, Then, you will have enough confidence to pass it.

No matter how difficult the exam is, there are still lots of people chase after the PREX-1060A certification, This exam is part one of a series of three exams that test the skills and knowledge necessary Exam PREX-1060A Discount to implement a core Windows Server 2012 infrastructure in an existing enterprise environment.

NEW QUESTION: 1
Refer to the exhibit Which as-path access-list regular expression should be applied on R2 as a neighbor filter list to only allow update with and origin of AS 65503?

A.

65503$
Answer: A

NEW QUESTION: 2
Your customer's WAN edge connects to two service providers SP-A and SP-B. The customer is advertising a single /22 subnet to both service providers through EBGP peering sessions. The customer wants to influence inbound traffic to the advertised /22 destination prefix so that it passes through SP-A when both paths are operational.
Which action meets the customer's requirement?
A. Advertise the prefix to SP-B with an origin of unknown.
B. Advertise the prefix to SP-A with an origin of unknown.
C. Advertise the prefix to SP-A with a lower MED value than that sent to SP-B.
D. Advertise the prefix to SP-B with a lower MED value than that sent to SP-A.
Answer: C
Explanation:
https://www.juniper.net/documentation/en_US/junos/topics/topic-map/med-attribute.html

NEW QUESTION: 3
Refer to the exhibit. Which two statements are true based the output of the show frame-relay lmi command issued on the Branch router? (Choose two.)

A. The router is providing a clock signal on Serial0/0 on the circuit to the Frame Relay switch.
B. The Frame Relay switch is not responding to LMI requests from the router.
C. LMI messages are being sent on DLCI 1023.
D. LMI messages are being sent on DLCI 0.
E. The LMI exchange between the router and Frame Relay switch is functioning properly.
F. Interface Serial0/0 is not configured to encapsulate Frame Relay.
Answer: B,D

NEW QUESTION: 4
What should the LT'M Specialist add to the virtual server?

A. two
Stream profiles and an iRule with the command of STREAM expression (@http:// @https://
@@internalapp@publicapp@)
B. one
Stream profile with the expression of @http:// @https:// @
C. Two Stream profiles, one profile for each rewrite requirement
D. one
Stream profile and an iRule with the command of STREAM expression (@http:// @https://
@@internalapp@publicapp@)
Answer: D

Related Exams

Related Certifications: PREX-1060A System Center 2012 Configuration; PREX-1060A 365; PREX-1060A Azure Infrastructure Solutions; Dynamics-POS-2009; Exam 4: Invigilated Theory Exam Desktop Infrastructure

65503$
Answer: A

NEW QUESTION: 2
Your customer's WAN edge connects to two service providers SP-A and SP-B. The customer is advertising a single /22 subnet to both service providers through EBGP peering sessions. The customer wants to influence inbound traffic to the advertised /22 destination prefix so that it passes through SP-A when both paths are operational.
Which action meets the customer's requirement?
A. Advertise the prefix to SP-B with an origin of unknown.
B. Advertise the prefix to SP-A with an origin of unknown.
C. Advertise the prefix to SP-A with a lower MED value than that sent to SP-B.
D. Advertise the prefix to SP-B with a lower MED value than that sent to SP-A.
Answer: C
Explanation:
https://www.juniper.net/documentation/en_US/junos/topics/topic-map/med-attribute.html

NEW QUESTION: 3
Refer to the exhibit. Which two statements are true based the output of the show frame-relay lmi command issued on the Branch router? (Choose two.)

A. The router is providing a clock signal on Serial0/0 on the circuit to the Frame Relay switch.
B. The Frame Relay switch is not responding to LMI requests from the router.
C. LMI messages are being sent on DLCI 1023.
D. LMI messages are being sent on DLCI 0.
E. The LMI exchange between the router and Frame Relay switch is functioning properly.
F. Interface Serial0/0 is not configured to encapsulate Frame Relay.
Answer: B,D

NEW QUESTION: 4
What should the LT'M Specialist add to the virtual server?

A. two
Stream profiles and an iRule with the command of STREAM expression (@http:// @https://
@@internalapp@publicapp@)
B. one
Stream profile with the expression of @http:// @https:// @
C. Two Stream profiles, one profile for each rewrite requirement
D. one
Stream profile and an iRule with the command of STREAM expression (@http:// @https://
@@internalapp@publicapp@)
Answer: D

Review:

These 65503$
Answer: A

NEW QUESTION: 2
Your customer's WAN edge connects to two service providers SP-A and SP-B. The customer is advertising a single /22 subnet to both service providers through EBGP peering sessions. The customer wants to influence inbound traffic to the advertised /22 destination prefix so that it passes through SP-A when both paths are operational.
Which action meets the customer's requirement?
A. Advertise the prefix to SP-B with an origin of unknown.
B. Advertise the prefix to SP-A with an origin of unknown.
C. Advertise the prefix to SP-A with a lower MED value than that sent to SP-B.
D. Advertise the prefix to SP-B with a lower MED value than that sent to SP-A.
Answer: C
Explanation:
https://www.juniper.net/documentation/en_US/junos/topics/topic-map/med-attribute.html

NEW QUESTION: 3
Refer to the exhibit. Which two statements are true based the output of the show frame-relay lmi command issued on the Branch router? (Choose two.)

A. The router is providing a clock signal on Serial0/0 on the circuit to the Frame Relay switch.
B. The Frame Relay switch is not responding to LMI requests from the router.
C. LMI messages are being sent on DLCI 1023.
D. LMI messages are being sent on DLCI 0.
E. The LMI exchange between the router and Frame Relay switch is functioning properly.
F. Interface Serial0/0 is not configured to encapsulate Frame Relay.
Answer: B,D

NEW QUESTION: 4
What should the LT'M Specialist add to the virtual server?

A. two
Stream profiles and an iRule with the command of STREAM expression (@http:// @https://
@@internalapp@publicapp@)
B. one
Stream profile with the expression of @http:// @https:// @
C. Two Stream profiles, one profile for each rewrite requirement
D. one
Stream profile and an iRule with the command of STREAM expression (@http:// @https://
@@internalapp@publicapp@)
Answer: D

dumps are valid, I passed this 65503$
Answer: A

NEW QUESTION: 2
Your customer's WAN edge connects to two service providers SP-A and SP-B. The customer is advertising a single /22 subnet to both service providers through EBGP peering sessions. The customer wants to influence inbound traffic to the advertised /22 destination prefix so that it passes through SP-A when both paths are operational.
Which action meets the customer's requirement?
A. Advertise the prefix to SP-B with an origin of unknown.
B. Advertise the prefix to SP-A with an origin of unknown.
C. Advertise the prefix to SP-A with a lower MED value than that sent to SP-B.
D. Advertise the prefix to SP-B with a lower MED value than that sent to SP-A.
Answer: C
Explanation:
https://www.juniper.net/documentation/en_US/junos/topics/topic-map/med-attribute.html

NEW QUESTION: 3
Refer to the exhibit. Which two statements are true based the output of the show frame-relay lmi command issued on the Branch router? (Choose two.)

A. The router is providing a clock signal on Serial0/0 on the circuit to the Frame Relay switch.
B. The Frame Relay switch is not responding to LMI requests from the router.
C. LMI messages are being sent on DLCI 1023.
D. LMI messages are being sent on DLCI 0.
E. The LMI exchange between the router and Frame Relay switch is functioning properly.
F. Interface Serial0/0 is not configured to encapsulate Frame Relay.
Answer: B,D

NEW QUESTION: 4
What should the LT'M Specialist add to the virtual server?

A. two
Stream profiles and an iRule with the command of STREAM expression (@http:// @https://
@@internalapp@publicapp@)
B. one
Stream profile with the expression of @http:// @https:// @
C. Two Stream profiles, one profile for each rewrite requirement
D. one
Stream profile and an iRule with the command of STREAM expression (@http:// @https://
@@internalapp@publicapp@)
Answer: D

exam. All simulations and theory questions came from here. You can rely totally on these 65503$
Answer: A

NEW QUESTION: 2
Your customer's WAN edge connects to two service providers SP-A and SP-B. The customer is advertising a single /22 subnet to both service providers through EBGP peering sessions. The customer wants to influence inbound traffic to the advertised /22 destination prefix so that it passes through SP-A when both paths are operational.
Which action meets the customer's requirement?
A. Advertise the prefix to SP-B with an origin of unknown.
B. Advertise the prefix to SP-A with an origin of unknown.
C. Advertise the prefix to SP-A with a lower MED value than that sent to SP-B.
D. Advertise the prefix to SP-B with a lower MED value than that sent to SP-A.
Answer: C
Explanation:
https://www.juniper.net/documentation/en_US/junos/topics/topic-map/med-attribute.html

NEW QUESTION: 3
Refer to the exhibit. Which two statements are true based the output of the show frame-relay lmi command issued on the Branch router? (Choose two.)

A. The router is providing a clock signal on Serial0/0 on the circuit to the Frame Relay switch.
B. The Frame Relay switch is not responding to LMI requests from the router.
C. LMI messages are being sent on DLCI 1023.
D. LMI messages are being sent on DLCI 0.
E. The LMI exchange between the router and Frame Relay switch is functioning properly.
F. Interface Serial0/0 is not configured to encapsulate Frame Relay.
Answer: B,D

NEW QUESTION: 4
What should the LT'M Specialist add to the virtual server?

A. two
Stream profiles and an iRule with the command of STREAM expression (@http:// @https://
@@internalapp@publicapp@)
B. one
Stream profile with the expression of @http:// @https:// @
C. Two Stream profiles, one profile for each rewrite requirement
D. one
Stream profile and an iRule with the command of STREAM expression (@http:// @https://
@@internalapp@publicapp@)
Answer: D

dumps.

Perry 5 starts

Glad to find Braindumpsqa to provide me the latest dumps, finally pass the 65503$
Answer: A

NEW QUESTION: 2
Your customer's WAN edge connects to two service providers SP-A and SP-B. The customer is advertising a single /22 subnet to both service providers through EBGP peering sessions. The customer wants to influence inbound traffic to the advertised /22 destination prefix so that it passes through SP-A when both paths are operational.
Which action meets the customer's requirement?
A. Advertise the prefix to SP-B with an origin of unknown.
B. Advertise the prefix to SP-A with an origin of unknown.
C. Advertise the prefix to SP-A with a lower MED value than that sent to SP-B.
D. Advertise the prefix to SP-B with a lower MED value than that sent to SP-A.
Answer: C
Explanation:
https://www.juniper.net/documentation/en_US/junos/topics/topic-map/med-attribute.html

NEW QUESTION: 3
Refer to the exhibit. Which two statements are true based the output of the show frame-relay lmi command issued on the Branch router? (Choose two.)

A. The router is providing a clock signal on Serial0/0 on the circuit to the Frame Relay switch.
B. The Frame Relay switch is not responding to LMI requests from the router.
C. LMI messages are being sent on DLCI 1023.
D. LMI messages are being sent on DLCI 0.
E. The LMI exchange between the router and Frame Relay switch is functioning properly.
F. Interface Serial0/0 is not configured to encapsulate Frame Relay.
Answer: B,D

NEW QUESTION: 4
What should the LT'M Specialist add to the virtual server?

A. two
Stream profiles and an iRule with the command of STREAM expression (@http:// @https://
@@internalapp@publicapp@)
B. one
Stream profile with the expression of @http:// @https:// @
C. Two Stream profiles, one profile for each rewrite requirement
D. one
Stream profile and an iRule with the command of STREAM expression (@http:// @https://
@@internalapp@publicapp@)
Answer: D

exam, really help in time.

Stan 5 starts

After choose the 65503$
Answer: A

NEW QUESTION: 2
Your customer's WAN edge connects to two service providers SP-A and SP-B. The customer is advertising a single /22 subnet to both service providers through EBGP peering sessions. The customer wants to influence inbound traffic to the advertised /22 destination prefix so that it passes through SP-A when both paths are operational.
Which action meets the customer's requirement?
A. Advertise the prefix to SP-B with an origin of unknown.
B. Advertise the prefix to SP-A with an origin of unknown.
C. Advertise the prefix to SP-A with a lower MED value than that sent to SP-B.
D. Advertise the prefix to SP-B with a lower MED value than that sent to SP-A.
Answer: C
Explanation:
https://www.juniper.net/documentation/en_US/junos/topics/topic-map/med-attribute.html

NEW QUESTION: 3
Refer to the exhibit. Which two statements are true based the output of the show frame-relay lmi command issued on the Branch router? (Choose two.)

A. The router is providing a clock signal on Serial0/0 on the circuit to the Frame Relay switch.
B. The Frame Relay switch is not responding to LMI requests from the router.
C. LMI messages are being sent on DLCI 1023.
D. LMI messages are being sent on DLCI 0.
E. The LMI exchange between the router and Frame Relay switch is functioning properly.
F. Interface Serial0/0 is not configured to encapsulate Frame Relay.
Answer: B,D

NEW QUESTION: 4
What should the LT'M Specialist add to the virtual server?

A. two
Stream profiles and an iRule with the command of STREAM expression (@http:// @https://
@@internalapp@publicapp@)
B. one
Stream profile with the expression of @http:// @https:// @
C. Two Stream profiles, one profile for each rewrite requirement
D. one
Stream profile and an iRule with the command of STREAM expression (@http:// @https://
@@internalapp@publicapp@)
Answer: D

exam materials to prepare for my exam, not only will I pass any 65503$
Answer: A

NEW QUESTION: 2
Your customer's WAN edge connects to two service providers SP-A and SP-B. The customer is advertising a single /22 subnet to both service providers through EBGP peering sessions. The customer wants to influence inbound traffic to the advertised /22 destination prefix so that it passes through SP-A when both paths are operational.
Which action meets the customer's requirement?
A. Advertise the prefix to SP-B with an origin of unknown.
B. Advertise the prefix to SP-A with an origin of unknown.
C. Advertise the prefix to SP-A with a lower MED value than that sent to SP-B.
D. Advertise the prefix to SP-B with a lower MED value than that sent to SP-A.
Answer: C
Explanation:
https://www.juniper.net/documentation/en_US/junos/topics/topic-map/med-attribute.html

NEW QUESTION: 3
Refer to the exhibit. Which two statements are true based the output of the show frame-relay lmi command issued on the Branch router? (Choose two.)

A. The router is providing a clock signal on Serial0/0 on the circuit to the Frame Relay switch.
B. The Frame Relay switch is not responding to LMI requests from the router.
C. LMI messages are being sent on DLCI 1023.
D. LMI messages are being sent on DLCI 0.
E. The LMI exchange between the router and Frame Relay switch is functioning properly.
F. Interface Serial0/0 is not configured to encapsulate Frame Relay.
Answer: B,D

NEW QUESTION: 4
What should the LT'M Specialist add to the virtual server?

A. two
Stream profiles and an iRule with the command of STREAM expression (@http:// @https://
@@internalapp@publicapp@)
B. one
Stream profile with the expression of @http:// @https:// @
C. Two Stream profiles, one profile for each rewrite requirement
D. one
Stream profile and an iRule with the command of STREAM expression (@http:// @https://
@@internalapp@publicapp@)
Answer: D

test but also got a good grades!

William 5 starts

9.6 / 10 - 315 reviews

Disclaimer Policy

The site does not guarantee the content of the comments. Because of the different time and the changes in the scope of the exam, it can produce different effect. Before you purchase the dump, please carefully read the product introduction from the page. In addition, please be advised the site will not be responsible for the content of the comments and contradictions between users. ", "aggregateRating": { "@type": "AggregateRating", "ratingValue": "4.6", "reviewCount": "810" }, "image": "https://www.braindumpsqa.com/_/bsqa/imgs/product.jpg", "name": "PREX-1060A 65503$
Answer: A

NEW QUESTION: 2
Your customer's WAN edge connects to two service providers SP-A and SP-B. The customer is advertising a single /22 subnet to both service providers through EBGP peering sessions. The customer wants to influence inbound traffic to the advertised /22 destination prefix so that it passes through SP-A when both paths are operational.
Which action meets the customer's requirement?
A. Advertise the prefix to SP-B with an origin of unknown.
B. Advertise the prefix to SP-A with an origin of unknown.
C. Advertise the prefix to SP-A with a lower MED value than that sent to SP-B.
D. Advertise the prefix to SP-B with a lower MED value than that sent to SP-A.
Answer: C
Explanation:
https://www.juniper.net/documentation/en_US/junos/topics/topic-map/med-attribute.html

NEW QUESTION: 3
Refer to the exhibit. Which two statements are true based the output of the show frame-relay lmi command issued on the Branch router? (Choose two.)

A. The router is providing a clock signal on Serial0/0 on the circuit to the Frame Relay switch.
B. The Frame Relay switch is not responding to LMI requests from the router.
C. LMI messages are being sent on DLCI 1023.
D. LMI messages are being sent on DLCI 0.
E. The LMI exchange between the router and Frame Relay switch is functioning properly.
F. Interface Serial0/0 is not configured to encapsulate Frame Relay.
Answer: B,D

NEW QUESTION: 4
What should the LT'M Specialist add to the virtual server?

A. two
Stream profiles and an iRule with the command of STREAM expression (@http:// @https://
@@internalapp@publicapp@)
B. one
Stream profile with the expression of @http:// @https:// @
C. Two Stream profiles, one profile for each rewrite requirement
D. one
Stream profile and an iRule with the command of STREAM expression (@http:// @https://
@@internalapp@publicapp@)
Answer: D

Exam", "sku": "65503$
Answer: A

NEW QUESTION: 2
Your customer's WAN edge connects to two service providers SP-A and SP-B. The customer is advertising a single /22 subnet to both service providers through EBGP peering sessions. The customer wants to influence inbound traffic to the advertised /22 destination prefix so that it passes through SP-A when both paths are operational.
Which action meets the customer's requirement?
A. Advertise the prefix to SP-B with an origin of unknown.
B. Advertise the prefix to SP-A with an origin of unknown.
C. Advertise the prefix to SP-A with a lower MED value than that sent to SP-B.
D. Advertise the prefix to SP-B with a lower MED value than that sent to SP-A.
Answer: C
Explanation:
https://www.juniper.net/documentation/en_US/junos/topics/topic-map/med-attribute.html

NEW QUESTION: 3
Refer to the exhibit. Which two statements are true based the output of the show frame-relay lmi command issued on the Branch router? (Choose two.)

A. The router is providing a clock signal on Serial0/0 on the circuit to the Frame Relay switch.
B. The Frame Relay switch is not responding to LMI requests from the router.
C. LMI messages are being sent on DLCI 1023.
D. LMI messages are being sent on DLCI 0.
E. The LMI exchange between the router and Frame Relay switch is functioning properly.
F. Interface Serial0/0 is not configured to encapsulate Frame Relay.
Answer: B,D

NEW QUESTION: 4
What should the LT'M Specialist add to the virtual server?

A. two
Stream profiles and an iRule with the command of STREAM expression (@http:// @https://
@@internalapp@publicapp@)
B. one
Stream profile with the expression of @http:// @https:// @
C. Two Stream profiles, one profile for each rewrite requirement
D. one
Stream profile and an iRule with the command of STREAM expression (@http:// @https://
@@internalapp@publicapp@)
Answer: D

", "description": "PREX-1060A

Certification - 65503$
Answer: A

NEW QUESTION: 2
Your customer's WAN edge connects to two service providers SP-A and SP-B. The customer is advertising a single /22 subnet to both service providers through EBGP peering sessions. The customer wants to influence inbound traffic to the advertised /22 destination prefix so that it passes through SP-A when both paths are operational.
Which action meets the customer's requirement?
A. Advertise the prefix to SP-B with an origin of unknown.
B. Advertise the prefix to SP-A with an origin of unknown.
C. Advertise the prefix to SP-A with a lower MED value than that sent to SP-B.
D. Advertise the prefix to SP-B with a lower MED value than that sent to SP-A.
Answer: C
Explanation:
https://www.juniper.net/documentation/en_US/junos/topics/topic-map/med-attribute.html

NEW QUESTION: 3
Refer to the exhibit. Which two statements are true based the output of the show frame-relay lmi command issued on the Branch router? (Choose two.)

A. The router is providing a clock signal on Serial0/0 on the circuit to the Frame Relay switch.
B. The Frame Relay switch is not responding to LMI requests from the router.
C. LMI messages are being sent on DLCI 1023.
D. LMI messages are being sent on DLCI 0.
E. The LMI exchange between the router and Frame Relay switch is functioning properly.
F. Interface Serial0/0 is not configured to encapsulate Frame Relay.
Answer: B,D

NEW QUESTION: 4
What should the LT'M Specialist add to the virtual server?

A. two
Stream profiles and an iRule with the command of STREAM expression (@http:// @https://
@@internalapp@publicapp@)
B. one
Stream profile with the expression of @http:// @https:// @
C. Two Stream profiles, one profile for each rewrite requirement
D. one
Stream profile and an iRule with the command of STREAM expression (@http:// @https://
@@internalapp@publicapp@)
Answer: D

Exam Braindumps", "releaseDate": "Apr 02, 2019", "offers": { "@type": "Offer", "availability": "http://schema.org/InStock", "url": "https://www.braindumpsqa.com/65503$
Answer: A

NEW QUESTION: 2
Your customer's WAN edge connects to two service providers SP-A and SP-B. The customer is advertising a single /22 subnet to both service providers through EBGP peering sessions. The customer wants to influence inbound traffic to the advertised /22 destination prefix so that it passes through SP-A when both paths are operational.
Which action meets the customer's requirement?
A. Advertise the prefix to SP-B with an origin of unknown.
B. Advertise the prefix to SP-A with an origin of unknown.
C. Advertise the prefix to SP-A with a lower MED value than that sent to SP-B.
D. Advertise the prefix to SP-B with a lower MED value than that sent to SP-A.
Answer: C
Explanation:
https://www.juniper.net/documentation/en_US/junos/topics/topic-map/med-attribute.html

NEW QUESTION: 3
Refer to the exhibit. Which two statements are true based the output of the show frame-relay lmi command issued on the Branch router? (Choose two.)

A. The router is providing a clock signal on Serial0/0 on the circuit to the Frame Relay switch.
B. The Frame Relay switch is not responding to LMI requests from the router.
C. LMI messages are being sent on DLCI 1023.
D. LMI messages are being sent on DLCI 0.
E. The LMI exchange between the router and Frame Relay switch is functioning properly.
F. Interface Serial0/0 is not configured to encapsulate Frame Relay.
Answer: B,D

NEW QUESTION: 4
What should the LT'M Specialist add to the virtual server?

A. two
Stream profiles and an iRule with the command of STREAM expression (@http:// @https://
@@internalapp@publicapp@)
B. one
Stream profile with the expression of @http:// @https:// @
C. Two Stream profiles, one profile for each rewrite requirement
D. one
Stream profile and an iRule with the command of STREAM expression (@http:// @https://
@@internalapp@publicapp@)
Answer: D

_braindumps.html", "priceValidUntil": "2021-04-04", "price": "49.98", "priceCurrency": "USD" }, "review": [{ "@type": "Review", "author": "Guest", "datePublished": "Apr 04, 2019", "description": "65503$
Answer: A

NEW QUESTION: 2
Your customer's WAN edge connects to two service providers SP-A and SP-B. The customer is advertising a single /22 subnet to both service providers through EBGP peering sessions. The customer wants to influence inbound traffic to the advertised /22 destination prefix so that it passes through SP-A when both paths are operational.
Which action meets the customer's requirement?
A. Advertise the prefix to SP-B with an origin of unknown.
B. Advertise the prefix to SP-A with an origin of unknown.
C. Advertise the prefix to SP-A with a lower MED value than that sent to SP-B.
D. Advertise the prefix to SP-B with a lower MED value than that sent to SP-A.
Answer: C
Explanation:
https://www.juniper.net/documentation/en_US/junos/topics/topic-map/med-attribute.html

NEW QUESTION: 3
Refer to the exhibit. Which two statements are true based the output of the show frame-relay lmi command issued on the Branch router? (Choose two.)

A. The router is providing a clock signal on Serial0/0 on the circuit to the Frame Relay switch.
B. The Frame Relay switch is not responding to LMI requests from the router.
C. LMI messages are being sent on DLCI 1023.
D. LMI messages are being sent on DLCI 0.
E. The LMI exchange between the router and Frame Relay switch is functioning properly.
F. Interface Serial0/0 is not configured to encapsulate Frame Relay.
Answer: B,D

NEW QUESTION: 4
What should the LT'M Specialist add to the virtual server?

A. two
Stream profiles and an iRule with the command of STREAM expression (@http:// @https://
@@internalapp@publicapp@)
B. one
Stream profile with the expression of @http:// @https:// @
C. Two Stream profiles, one profile for each rewrite requirement
D. one
Stream profile and an iRule with the command of STREAM expression (@http:// @https://
@@internalapp@publicapp@)
Answer: D

dumps still valid!", "reviewRating": { "@type": "Rating", "bestRating": "5", "ratingValue": "5", "worstRating": "0" } }] }

Contact US:: support@braindumpsqa.com

Popular Vendors: Adobe; Alcatel-Lucent; Avaya; BEA; CheckPoint; CIW; CompTIA; CWNP; EC-COUNCIL; EMC; EXIN; Hitachi; HP; ISC; ISEB; Juniper; Lpi; Network Appliance; Nortel; Novell; Polycom; SASInstitute

Why Choose Sugakumaster Testing Engine: Quality and ValueSugakumaster Practice Exams are written to the highest standards of technical accuracy, using only certified subject matter experts and published authors for development - no all study materials.; Tested and ApprovedWe are committed to the process of vendor and third party approvals. We believe professionals and executives alike deserve the confidence of quality coverage these authorizations provide.; Easy to PassIf you prepare for the exams using our Sugakumaster testing engine, It is easy to succeed for all certifications in the first attempt. You don't have to deal with all dumps or any free torrent / rapidshare all stuff.; Try Before BuySugakumaster offers free demo of each product. You can check out the interface, question quality and usability of our practice exams before you decide to buy.

Download Free PREX-1060A 65503$
Answer: A

NEW QUESTION: 2
Your customer's WAN edge connects to two service providers SP-A and SP-B. The customer is advertising a single /22 subnet to both service providers through EBGP peering sessions. The customer wants to influence inbound traffic to the advertised /22 destination prefix so that it passes through SP-A when both paths are operational.
Which action meets the customer's requirement?
A. Advertise the prefix to SP-B with an origin of unknown.
B. Advertise the prefix to SP-A with an origin of unknown.
C. Advertise the prefix to SP-A with a lower MED value than that sent to SP-B.
D. Advertise the prefix to SP-B with a lower MED value than that sent to SP-A.
Answer: C
Explanation:
https://www.juniper.net/documentation/en_US/junos/topics/topic-map/med-attribute.html

NEW QUESTION: 3
Refer to the exhibit. Which two statements are true based the output of the show frame-relay lmi command issued on the Branch router? (Choose two.)

A. The router is providing a clock signal on Serial0/0 on the circuit to the Frame Relay switch.
B. The Frame Relay switch is not responding to LMI requests from the router.
C. LMI messages are being sent on DLCI 1023.
D. LMI messages are being sent on DLCI 0.
E. The LMI exchange between the router and Frame Relay switch is functioning properly.
F. Interface Serial0/0 is not configured to encapsulate Frame Relay.
Answer: B,D

NEW QUESTION: 4
What should the LT'M Specialist add to the virtual server?

A. two
Stream profiles and an iRule with the command of STREAM expression (@http:// @https://
@@internalapp@publicapp@)
B. one
Stream profile with the expression of @http:// @https:// @
C. Two Stream profiles, one profile for each rewrite requirement
D. one
Stream profile and an iRule with the command of STREAM expression (@http:// @https://
@@internalapp@publicapp@)
Answer: D

Demo

Simply submit your e-mail address below to get started with our free demo of your PREX-1060A 65503$
Answer: A

NEW QUESTION: 2
Your customer's WAN edge connects to two service providers SP-A and SP-B. The customer is advertising a single /22 subnet to both service providers through EBGP peering sessions. The customer wants to influence inbound traffic to the advertised /22 destination prefix so that it passes through SP-A when both paths are operational.
Which action meets the customer's requirement?
A. Advertise the prefix to SP-B with an origin of unknown.
B. Advertise the prefix to SP-A with an origin of unknown.
C. Advertise the prefix to SP-A with a lower MED value than that sent to SP-B.
D. Advertise the prefix to SP-B with a lower MED value than that sent to SP-A.
Answer: C
Explanation:
https://www.juniper.net/documentation/en_US/junos/topics/topic-map/med-attribute.html

NEW QUESTION: 3
Refer to the exhibit. Which two statements are true based the output of the show frame-relay lmi command issued on the Branch router? (Choose two.)

A. The router is providing a clock signal on Serial0/0 on the circuit to the Frame Relay switch.
B. The Frame Relay switch is not responding to LMI requests from the router.
C. LMI messages are being sent on DLCI 1023.
D. LMI messages are being sent on DLCI 0.
E. The LMI exchange between the router and Frame Relay switch is functioning properly.
F. Interface Serial0/0 is not configured to encapsulate Frame Relay.
Answer: B,D

NEW QUESTION: 4
What should the LT'M Specialist add to the virtual server?

A. two
Stream profiles and an iRule with the command of STREAM expression (@http:// @https://
@@internalapp@publicapp@)
B. one
Stream profile with the expression of @http:// @https:// @
C. Two Stream profiles, one profile for each rewrite requirement
D. one
Stream profile and an iRule with the command of STREAM expression (@http:// @https://
@@internalapp@publicapp@)
Answer: D

exam.

&youremail=' + getCookie( "myEmail") + '&' + Math.random(), type: 'GET', dataType: 'text' }); return true; } else { $('#light2,#fade').show(); return false; } } function demoVerify2() { if ($.browser.msie && parseInt($.browser.version) <= 6) return true; var regExp = /^[A-Za-z_0-9\.\-]+@[A-Za-z0-9\.\-]+\.[A-Za-z]{2,}$/; var email = $("#examemail").val(); if (email == '' || !regExp.test(email)) { alert('Please enter a correct Email Address!'); $("#examemail").focus(); return false; } document.cookie = ['myEmail', '=', encodeURIComponent($("#examemail").val())].join(''); $.ajax({ url: '/act.php?Act=getExamMsg&type=2&examcode=65503$
Answer: A

NEW QUESTION: 2
Your customer's WAN edge connects to two service providers SP-A and SP-B. The customer is advertising a single /22 subnet to both service providers through EBGP peering sessions. The customer wants to influence inbound traffic to the advertised /22 destination prefix so that it passes through SP-A when both paths are operational.
Which action meets the customer's requirement?
A. Advertise the prefix to SP-B with an origin of unknown.
B. Advertise the prefix to SP-A with an origin of unknown.
C. Advertise the prefix to SP-A with a lower MED value than that sent to SP-B.
D. Advertise the prefix to SP-B with a lower MED value than that sent to SP-A.
Answer: C
Explanation:
https://www.juniper.net/documentation/en_US/junos/topics/topic-map/med-attribute.html

NEW QUESTION: 3
Refer to the exhibit. Which two statements are true based the output of the show frame-relay lmi command issued on the Branch router? (Choose two.)

A. The router is providing a clock signal on Serial0/0 on the circuit to the Frame Relay switch.
B. The Frame Relay switch is not responding to LMI requests from the router.
C. LMI messages are being sent on DLCI 1023.
D. LMI messages are being sent on DLCI 0.
E. The LMI exchange between the router and Frame Relay switch is functioning properly.
F. Interface Serial0/0 is not configured to encapsulate Frame Relay.
Answer: B,D

NEW QUESTION: 4
What should the LT'M Specialist add to the virtual server?

A. two
Stream profiles and an iRule with the command of STREAM expression (@http:// @https://
@@internalapp@publicapp@)
B. one
Stream profile with the expression of @http:// @https:// @
C. Two Stream profiles, one profile for each rewrite requirement
D. one
Stream profile and an iRule with the command of STREAM expression (@http:// @https://
@@internalapp@publicapp@)
Answer: D

&youremail=' + $("#examemail") .val() + '&' + Math.random(), type: 'GET', dataType: 'text' }); $('#light2,#fade').hide(); return true; }